1-20
of
251
results
-
Flofit+ Push Fit Stem Elbow - ...Stem elbows are often used in a push fit plumbing application where there is l... Stem elbows are often used in a push fit plumbing application where there is limited space. They can be connected to any other type of coupling in order to give an instant swivel, allowing a pipe to be rotated in any direction. They are commonly used... more
-
Flofit+ Push Fit Chrome ISO Va...Iso valves, often referred to as isolating valves, are plumbing fittings that ... Iso valves, often referred to as isolating valves, are plumbing fittings that are used to adjust the flow of water from the mains to a water service pipe. These valves are easy to install and use by simply turning the valve on top with a slotted... more
-
Flofit+ Push Fit Reducing Tee ...Tees are among the most common types of fitting used in plumbing applications.... Tees are among the most common types of fitting used in plumbing applications. Push fit reducing tees are used to join three pipes of different diameters together in a T shape in order to combine or divide the fluid inside. Like all other push fit... more
-
FloPlast Push Fit Waste Socket...This socket plug is used to gain access into the waste system for inspection a... This socket plug is used to gain access into the waste system for inspection and cleaning. Often referred to as a cleaning eye, it is most commonly installed into a waste tee. Socket plugs can also be used to blank off an unused connection or pipe... more
-
FloPlast Air Admittance Valve ...Air admittance valves are an ingeniously designed fitting that avoids the need... Air admittance valves are an ingeniously designed fitting that avoids the need for a soil vent pipe to terminate externally and within the strict traditional guidelines that govern position. Traditionally, open vent pipes needed to be installed at... more
-
FloPlast Solvent Weld Offset B...This bend is commonly used in conjunction with an SP435 bottom offset to form ... This bend is commonly used in conjunction with an SP435 bottom offset to form a swan neck that allows the 110mm soil and vent pipe to be diverted out and around the eaves of the building before terminating above the roof level. The angle of this bend... more
-
FloPlast Push Fit Waste Reduce...This waste reducer is used when a 32mm waste pipe is connected into a 40mm pip... This waste reducer is used when a 32mm waste pipe is connected into a 40mm pipe, usually with the 32mm pipe dropping into the 40mm pipe below it running towards the soil pipe.It is usually used in the branch of a 40mm tee or in one end of a 40mm... more
-
FloPlast Push Fit Waste Bend K...Knuckle bends are used to create tight, neat 90 degree bends in a waste pipe s... Knuckle bends are used to create tight, neat 90 degree bends in a waste pipe system. They have a tighter radius than the standard swept bends.This fitting is available in 32mm, 40mm and 50mm size options, with 50mm only available in grey.This push fit... more
-
FloPlast Push Fit Waste Bend K...Knuckle bends are used to create tight, neat 90 degree bends in a waste pipe s... Knuckle bends are used to create tight, neat 90 degree bends in a waste pipe system. They have a tighter radius than the standard swept bends.This fitting is available in 32mm, 40mm and 50mm size options, with 50mm only available in grey.This push fit... more
-
FloPlast Push Fit Waste Bend S...Swept bends are used to create a 92.5 degree change of direction in a waste pi... Swept bends are used to create a 92.5 degree change of direction in a waste pipe system. They have a longer radius than knuckle bends and the 92.5 degree angle promotes a self-cleansing flow.This fitting is available in 32mm, 40mm and 50mm size... more
-
FloPlast Push Fit Waste Reduce...This waste reducer is used when a 32mm waste pipe is connected into a 50mm pip... This waste reducer is used when a 32mm waste pipe is connected into a 50mm pipe, usually with the 32mm pipe dropping into the 50mm pipe below it running towards the soil pipe.It is usually used in the branch of a 50mm tee or in one end of a 50mm... more
-
FloPlast Ring Seal Soil Access...The purpose of this 110mm soil access pipe is to allow the soil pipe system to... The purpose of this 110mm soil access pipe is to allow the soil pipe system to be inspected and cleared in the event of any blockage. In domestic properties it is usually situated at the foot of the soil pipe at the point where it enters the drainage... more
-
Flofit+ Push Fit Stem Reducer ...Stem reducers feature a push fit connection and a stem connection and are used... Stem reducers feature a push fit connection and a stem connection and are used to decrease the diameter of a straight pipe run by connecting two different diameter pipe lengths together. Like all other push fit plumbing fittings, they can be installed,... more
-
FloPlast Ring Seal Soil Bend S...This 45 degree bend is used to change the direction of a PVC soil pipe. It is ... This 45 degree bend is used to change the direction of a PVC soil pipe. It is also sometimes referred to as a 135 degree bend. This fitting can be used in either a horizontal or vertical plane, and two bends together are sometimes used as a pair to... more
-
FloPlast Ring Seal Soil Stack ...This Soil Stack set contains the basic poducts to build or replace a soil stac... This Soil Stack set contains the basic poducts to build or replace a soil stack, namely;3 x 3m 110mm Soil Pipe with Ring Seal Single Socket2 x Additional Push Fit Couplings3 x Pipe Clips1 x 87.5 Degree Junction1 x Vent Terminal 1 x 250ml Solvent... more
-
FloPlast Solvent Weld Soil Str...This fitting straps around a 110mm Soil Pipe to enable a waste pipe to be intr... This fitting straps around a 110mm Soil Pipe to enable a waste pipe to be introduced. A 54mm hole should be cut into the pipe, allowing the lug of the strap boss to fit snugly inside the pipe.Use in conjunction with our SP10, SP11 and SP12 Boss rubber... more
-
Flofit+ Push Fit Flexi Hose wi...Tap connectors are a very common type of fitting used in heating and plumbing ... Tap connectors are a very common type of fitting used in heating and plumbing systems. They are used to connect a plastic push fit pipe to a hot or cold tap. This tap connector features a 300mm length flexi hose to allow for flexibility during... more
-
Flofit+ Push Fit Coupling - 22...In a plumbing system, push fit couplings are used to join two lengths of plumb... In a plumbing system, push fit couplings are used to join two lengths of plumbing pipe together. These couplings can be installed, removed and re-used with ease by simply inserting said pipe while using a pipe insert and twisting the plastic nut to... more
-
FloPlast Ring Seal Soil Bend D...This 92.5-degree bend is used to change the direction of a PVC soil pipe. Most... This 92.5-degree bend is used to change the direction of a PVC soil pipe. Most commonly used in a horizontal plane, the 92.5 angle gives a slight fall which creates a self-cleansing flow within the soil pipe.Both single socket and double socket ring... more
Ads related to Plumbing Supplies
Find Plumbing Supplies, Professional Building Supplies, Push Fit Fittings Plumbing Supplies in Shopzilla's Home & Garden category: Compare prices of Plumbing Supplies, Professional Building Supplies, Push Fit Fittings Plumbing Supplies and buy your new Plumbing Supplies, Professional Building Supplies, Push Fit Fittings Plumbing Supply at a good price. When buying Plumbing Supplies, check how shoppers rated the different online shops. Simply select the store that has the Plumbing Supply you're looking for. If a Home & Garden store isn't rated yet it means that Shopzilla is still collecting shopper reviews.